Predictive fault-tolerant control of an all-thruster satellite in 6-DOF motion via neural network model updating

The problem of controlling an all-thruster spacecraft in the coupled translational-rotational motion in presence of actuators fault and/or failure is investigated in this paper. The nonlinear model predictive control approach is used because of its ability to predict the future behavior of the system. The fault/failure of the thrusters changes the mapping between the commanded forces to the thrusters and actual force/torque generated by the thruster system. Thus, the basic six degree-of-freedom kinetic equations are separated from this mapping and a set of neural networks are trained off-line to learn the kinetic equations. Then, two neural networks are attached to these trained networks in order to learn the thruster commands to force/torque mappings on-line. Different off-nominal conditions are modeled so that neural networks can detect any failure and fault, including scale factor and misalignment of thrusters. A simple model of the spacecraft relative motion is used in MPC to decrease the computational burden. However, a precise model by the means of orbit propagation including different types of perturbation is utilized to evaluate the usefulness of the proposed approach in actual conditions. The numerical simulation shows that this method can successfully control the all-thruster spacecraft with ON-OFF thrusters in different combinations of thruster fault and/or failure.     

基于位移和力值组合的静重式力标准机砝码加卸载控制方法研究

介绍了一种基于位移和力值组合的静重式力标准机砝码加卸载的控制方法，通过监测砝码的移动量和参考力传感器叠加系统的力值量，实时调整加卸载机构的加卸载速度，以实现对被检力传感器的平滑加卸载的目的。该方法有效解决了吊挂在加载过程中产生较大摆动，影响力标准机复现力值准确度的问题，同时也消除了力值过冲现象，避免了因逆程效应而导致的力传感器输出偏差。     

Neural network-based fault diagnosis for spacecraft with single-gimbal control moment gyros

This paper proposes a neural network-based fault diagnosis scheme to address the problem of fault isolation and estimation for the Single-Gimbal Control Moment Gyroscopes(SGCMGs) of spacecraft in a periodic orbit. To this end, a disturbance observer based on neural network is developed for active anti-disturbance, so as to improve the accuracy of fault diagnosis.The periodic disturbance on orbit can be decoupled with fault by resorting to the fitting and memory ability of neural network. Subsequ...     

涡扇发动机全包线加速控制计划改进方法研究

加速控制计划直接影响了发动机的响应速度以及运行安全。为了提高发动机响应能力,提出了一种基于等温度线的发动机全包线加速控制计划。分别针对稳态和动态过程开展相似换算误差分析,证明并验证了关键参数在等风扇进口温度时,具有较高相似换算精度的规律。基于此换算误差理论,提出全包线加速控制计划改进方法,该方法在不同等风扇进口温度下设计多条加速控制计划,再通过线性插值得到包线内不同等温线下的加速控制计划。结果表明,改进后的加速控制计划相比于传统单点优化得到的加速控制计划,发动机加速至最大转速的98%所需的时间减少了7.2%,最大转速提升了1%,且风扇、压气机喘振裕度和涡轮前温度等均未超出限制值。因此,该方法相比于传统单点优化方法既提升了在包线内获取的加速控制计划的精度,又确保了发动机在包线内安全稳定工作的前提下更好的发挥加速性能。     

航空发动机两种加速控制计划的融合控制方法研究

转速导数(N-dot)和换算燃油流量加速控制计划是航空发动机加速过程安全、快速的重要保障,但各自分别易受到功率提取、性能衰退和传感器、燃油计量装置误差的影响导致失速喘振或加速性的下降。为了提高所控制加速过程的鲁棒性,使用这两种控制计划所获燃油流量的偏差大小对N-dot控制计划的控制目标进行调节修正的融合控制方法获得实际的加速燃油流量。以双转子加力涡扇发动机为对象的仿真验证表明,该控制方法可以适应全包线加速控制的需要;相比其余两种控制计划在受功率提取、误差影响下保持正常工作的范围更广;相同工作条件下,该方法比N-dot控制计划更不易发生喘振,比换算燃油流量控制计划的加速时间更小。     

基于控制分配的恒压腔压力精准控制

针对采用双阀调节的恒压腔系统压力在空气流量大范围变化时的精确控制问题,提出了一种基于控制分配的恒压腔压力精准控制方法。首先,建立了虚拟放气流量的双阀控制分配算法,包括：建立满足虚拟放气流量要求且调节阀能耗最小的优化问题;通过线性矩阵不等式(Linear Matrix Inequality, LMI)求解该优化问题得到双阀实际流通面积值;考虑调节阀动态并计算调节阀控制信号指令值。其次,建立以虚拟放气流量为恒压腔控制输入的闭环负反馈回路,基于此,设计满足伺服性能和抗干扰性能要求的PI控制器,引入上述双阀控制分配算法,进而构建完整的基于控制分配的恒压腔压力控制系统。仿真结果表明,采用该方法的控制系统性能明显优于传统单阀PI控制系统性能,恒压腔压力动态相对误差小于0.07%;干扰流量最大变化率为77kg/s2时,压力最大偏差低于500Pa;此外,调节阀动态时间常数和流量系数的拉偏仿真结果进一步验证了该控制器的鲁棒性。     

基于多代理模型的航空发动机建模及优化方法

为了进一步提高航空发动机建模及优化方法的性能,本文提出了一种基于多代理模型技术的建模及优化方法。本文首先提出了一种新的代理模型全局误差估计方法,以此建立了新的多代理模型建模方法。然后提出了一种组合模型预测偏差估计方法,以此发展了一种基于多代理模型技术的优化方法。6个不同维度及不同训练集大小的解析测试算例的结果表明,本文所发展的建模方法相较于现有方法精度更高,本文所发展的优化方法相较于经典代理模型优化方法算法收敛性更强。同时变循环发动机稳态性能建模及加速燃油控制规律优化实例表明,本文所发展的方法在处理实际工程问题时,依旧可以表现出良好的算法性能。     

基于PID和LESO的无人机控制

针对四旋翼无人机控制模型耦合程度高、非线性关系复杂,设计了一种基于PID和LESO的控制方法,选取无人机的某个状态变量作为控制量,通过简化模型对状态变量进行解耦控制,进而在控制系统中加入线性扩张状态观测器(LESO),提高模型的抗干扰能力。通过仿真和实际飞行与传统PID方法进行比较,充分验证了自抗扰控制(ADRC)在无人机飞行控制中具有鲁棒性强、精度高、易于实现等特点。     

Civil unmanned aircraft system operation in national airspace: A survey from Air Navigation Service Provider perspective

Unmanned Aircraft Systems (UASs) have advanced technologically and surged exponentially over recent years. Currently, due to safety concerns, most civil operations of UAS are conducted in low-level uncontrolled area or in segregated controlled airspace. As the industry progresses, both operational and technological capabilities have matured to the point where UASs are expected to gain greater freedom of access to both controlled and uncontrolled airspace. Extensive technical and regulatory surveys have been conducted to enable the expanded operations. However, most surveys are derived from the perspective of UAS own operating mechanism and barely consider interactions of their non-segregated activities with the Air Traffic Management (ATM) system. Hence, to fill the gap, this paper presents a survey conducted from the perspective of Air Navigation Service Provider (ANSP), which serves to accommodate these new entrants to the overall national airspace while continuing flight safety and efficiency. The primary objectives of this paper are to: (A) describe what typical ANSP-supplied UAS Traffic Management (UTM) architecture is required to facilitate all types of civil UAS operations; (B) identify three major ANSP considerations on how UAS can be accommodated safely in civil airspace; (C) outline future directions and challenges related with UAS operations for the ANSP.     

控制力矩陀螺磁悬浮转子的指数趋近积分滑模控制研究

针对微重力、动框架等多源扰动下磁悬浮控制力矩陀螺磁轴承转子系统的强非线性、参数摄动及未建模动态等问题,开展控制力矩陀螺的磁轴承转子鲁棒控制研究。建立了磁轴承转子轴向通道动力学模型与电磁力工作点线性化模型,分析了系统参数摄动及未建模动态,并在此基础上提出了一种非线性系统指数趋近积分滑模控制方法,设计了含有电流及位移的积分滑模平面,采用指数趋近律与饱和函数抑制抖振实现到达阶段滑模控制律。实验结果表明：采用该方法可有效抑制滑模的抖振现象,参数摄动时系统具有较佳动态性能,同时在转子转动、框架工作时保证系统良好鲁棒性。